In this modern era, the Netgear Orbi mesh wifi system is apowerful networking device. This system comes with satellites that help people to enhance the router network throughout the house. But, you need to update the Orbi satellite from time to time to get the best out of it. If you are unaware of the Orbi firmware update then you don’t need to search about the process anywhere because we will help you.In this post, we are going to tell you about the manual method to update the firmware of the Netgear Orbi system. So, we recommend you stick with the reading until you read the entire post.
Basic Requirements of the Firmware Update
Before performing the Netgear Orbi firmware you need to prepare some basic requirements so that you get a successful update of the Orbi
These are the requirements that you need to get prepared just before performing the Netgear Orbi firmware update. Now let’s move to the important steps of the manual method.
Manual Method to Update Orbi Firmware
Manual method is the most preferable method for Orbi users because it is very easy to perform. In this process, you need to perform a few steps. So, walk through them and fruitfully follow them.
Power Up the Orbi
First, give the fluctuation-free power supply to the Orbi through a power socket. Make sure you use a non-damaged electricity source. If you use the damaged wall outlet, then it might create an issue with the procedure.Once you plug the Orbi into the socket, you need to press the turn-on button.Now your Orbi is booted up for the further process.
Connect the router and modem
Now, you need to make a strong and reliable connection between the Orbi router and modem with an Ethernet cable. Make sure you use a quality Ethernet cablethat supplies the proper network. We tell you this because sometimes users face the Orbi pink light on their system due to poor connection between the devices.Apart from it, insert the Ethernet cable properly into the Ethernet ports of the device.
Power On the Computer
You need to switch on the computer or laptop for the further process. To switch on the computer you need to plug it into the non-damaged wall outlet. You can also use the UPS in order to give power backup in case of a power cut.
Open the Internet Browser
Launch the internet browser on your device and make sure you use the updated browser. Once you open the browser you need to download the firmware version file of Orbi and save it at the desired location.Make sure your internet browser’s extra files like cache and cookies are should be cleared for the best outcomes.
Access the Default URL
You can access the default web address by inserting it into the address bar carefully without making any typing mistakes. Thereafter, press the Key Enter key.
Log Into the Orbi
Now, you need to put the default credentials into the on-screen fields and click on the Log In button. After that, you will see the dashboard of the Netgear Orbi in which you need to find out the Manual firmware update panel. You need to perform the sub-steps: Locate the Advance Settings
In this best way, you can update your Orbi satellite hassle-free.
